Acid challenge exacerbates activation of matrix metalloproteinases in permanent teeth undergoing radiotherapy.

The aim of this study was to investigate the effect of acid challenge on the activation of matrix metalloproteinases (MMPs) in the Dentinoenamel junction of primary and permanent teeth submitted to radiotherapy. For this purpose, a total of 178 dental fragments obtained from molars were used, and randomly divided into 2 groups (primary and permanent teeth) / 4 experimental subgroups (irradiated and non-irradiated, demineralized and non-demineralized). The fragments were exposed to radiation, with a dose fraction of 2 Gy, for 5 consecutive days, until a total dose of 60 Gy was reached, with a total of 30 cycles, for 6 weeks. To determine the activity of MMPs on the dentinoenamel junction (DEJ), in situ zymography assays on 0.6mm dental fragments were performed. To assess whether MMP activity would be impacted by an acidic environment, the fragments were placed in a demineralizing solution (pH of 4.8). The finding was that irradiation activated MMPs in DEJ and these effects were more evident in permanent when compared with primary teeth. When the effect of an acid challenge on MMPs activity was investigated, demineralization was observed not to increase MMPs activity in non-irradiated teeth, but it did increase MMPs activity in irradiated teeth. In conclusion, an acid challenge was found to exacerbate activation of MMPs in DEJ of permanent teeth submitted to irradiation, but not in primary teeth.

Low-fluoride gels supplemented with nano-sized sodium trimetaphosphate reduce dentin erosive wear in vitro.

OBJECTIVE: The study assessed the effect of low-fluoride gels supplemented with micrometric or nano-sized sodium trimetaphosphate (TMP) on dentin erosive wear in vitro. DESIGN: Bovine dentin blocks (n = 154) were selected by surface microhardness and randomly allocated into seven groups (n = 22/group), according to the gels: Placebo; 4500 ppm F (4500F); 9000 ppm F (9000F); 5% TMP microparticulate plus 4500F (5TMPm+4500F); 2.5% TMP nanoparticulate plus 4500 F (2.5TMPn+4500F); 5% TMP nanoparticulate plus 4500F (5TMPn+4500F); and 12,300 ppm F acid gel (APF). All blocks were treated only once for 60 s and cyclically eroded (ERO, citric acid, 4 × 90 s/day) or eroded and brushed (4 × 15 s/day, five strokes/s, ERO+ABR) over five days (each subgroup n = 11). Dentin wear and integrated hardness loss in depth (ΔKHN) were determined, and the data were submitted to two-way ANOVA, followed by Tukey's test, and Spearman's correlation (p < 0.05). RESULTS: For ERO, all gels containing 4500F supplemented with TMP significantly reduced dentin wear compared with their counterpart without TMP, reaching values similar to 9000F. For ERO+ABR, 5TMPn+ 4500F gel led to significantly lower wear than all its counterparts, reaching values similar to 9000F and APF. As for ΔKHN, all gels containing TMP promoted superior protective effects compared with 4500F, reaching values similar to 9000F and APF under both challenges. A positive correlation between dentin wear and mineral content in depth was verified. CONCLUSIONS: Gels containing 4500F supplemented with TMP significantly reduced dentin erosive wear compared with pure 4500F, with additional benefit from the use of nanoparticles.

Clinical implementation of comprehending dentin on a microscopic level

SUMMARY: The aim of the present in vitro study is to visualize dentin to get an in-depth knowledge of the nature of dentin that could provide useful information regarding conditioning dentinal substrate when treating dentinal lesions. Forty-nine extracted human third molars were obtained and prepared to produce artificial dentinal lesions through demineralizing with acetic acid for 7 and 14 days, or lactic acid for 7 days. The teeth were divided into groups and treated with either NaOCl, pepsin, trypsin, or phosphoric acid. To obtain information on the morphology of the treated dentinal surfaces, all samples were visualized under high resolution field emission scanning electron microscope. With high magnification reaching x50000 dentin was clearly visualized together with its constitutes. The effect of various demineralization approaches and various treatment protocols were demonstrated clearly. The relationship between the conditioning procedure steps and the subsequent bond strength was discussed. To our best knowledge, there is no previous clear highly magnified scanning electron microscope images for dentin, and dentinal components and constitutes with and without various treatments. The current in vitro study suggests the complexity nature of dentin as a substrate that should be treated carefully especially with technique sensitive procedures such as adhesive restorations.

El objetivo del presente estudio in vitro fue visualizar la dentina para obtener un conocimiento completo de la naturaleza de ella lo que podría proporcionar información útil sobre el acondicionamiento del sustrato dentinario en el tratamiento de lesiones dentinarias. Se obtuvieron 49 terceros molares humanos extraídos y se prepararon para producir lesiones dentinales artificiales mediante desmineralización con ácido acético por 7 y 14 días, o ácido láctico por 7 días. Los dientes se dividieron en grupos y se trataron con NaOCl, pepsina, tripsina o ácido fosfórico. Para obtener información sobre la morfología de las superficies dentinarias tratadas, todas las muestras se visualizaron bajo un microscopio electrónico de barrido de emisión de campo de alta resolución. Con un gran aumento que alcanzó x50000, la dentina se visualizó claramente junto con sus componentes. Se demostró el efecto de varios enfoques de desmineralización y varios protocolos de tratamiento. Se discutió la relación entre los pasos del procedimiento de acondicionamiento y la subsiguiente fuerza de unión. Hasta donde sabemos, no hay imágenes claras previas de microscopio electrónico de barrido altamente ampliadas para la dentina y los componentes y constituyentes de la dentina con y sin diferentes tratamientos. El estudio in vitro actual sugiere la naturaleza compleja de la dentina como sustrato que debe tratarse con cuidado, especialmente en los procedimientos sensibles a la técnica, tal como las restauraciones adhesivas.

Effects of using different root canal sealers and protocols for cleaning intraradicular dentin on the bond strength of a composite resin used to reinforce weakened roots / Efectos del uso de diferentes selladores de conductos radiculares y protocolos para limpiar la dentina intrarradicular sobre la fuerza de unión de una resina compuesta utilizada para reforzar raíces debilitadas

Background: This study evaluated the effects of using different root canal sealers and protocols for cleaning intraradicular dentin on the bond strength of a composite resin used to reinforce weakened roots. Material and Methods: Sixty-four roots of extracted human maxillary canines were weakened, prepared and filled with two different endodontic sealers (Endofill and AH Plus). In half of the sample, set aside for each respective sealer, excess filling material was cleaned. In the other half, the weakened areas were not cleaned, and the excess of sealer was spread on the intraradicular dentin. Intentionally worn areas inside each root were restored with a microhybrid light-cure composite resin (Z100) to reinforce them, with and without acid etching. Prefabricated metal posts were fixed with a dual resin cement (RelyX ARC), and the specimens were submitted to a pull-out test. Statistical analysis was performed by means of Shapiro-Wilk, analysis of variance (one-way ANOVA) and Tukey-Kramer tests (p<0.05). Results: The groups filled with Endofill (GI, GII, GIII, GIV) had the lowest bond strength values, which were similar among each other (p>0.05).The greatest bond strength values were observed in roots filled with AH Plus (GV, GVI, GVII, GVIII), mainly without cleaning of the weakened areas, and followed by acid etching (GVII), and also with cleaning of the weakened areas, however, with no acid etching (GVI) (p<0.05). Conclusion: The greatest bond strength values were observed in roots filled with AH Plus; (1) without cleaning of the weakened areas and with acid etching, and; (2) with cleaning of the weakened areas, but without acid etching.

Antecedentes: este estudio evaluó los efectos del uso de diferentes selladores de conductos radiculares y protocolos para limpiar la dentina intrarradicular sobre la fuerza de unión de una resina compuesta utilizada para reforzar las raíces debilitadas. Material y Métodos: Sesenta y cuatro raíces de caninos maxilares humanos extraídos fueron debilitadas, preparadas y rellenadas con dos selladores endodónticos diferentes (Endofill y AH Plus). En la mitad de la muestra, reservada para cada sellador respectivo, se limpió el exceso de material de relleno. En la otra mitad, las áreas debilitadas no se limpiaron y el exceso de sellador se esparció sobre la dentina intrarradicular. Las áreas desgastadas intencionalmente dentro de cada raíz se restauraron con una resina compuesta fotopolimerizable microhíbrida (Z100) para reforzarlas, con y sin grabado ácido. Los postes metálicos prefabricados se fijaron con un cemento de resina dual (RelyX ARC) y los especímenes se sometieron a una prueba de extracción. El análisis estadístico se realizó mediante Shapiro-Wilk, análisis de varianza (ANOVA de una vía) y pruebas de Tukey-Kramer (p<0,05). Resultados: Los grupos rellenos con Endofill (GI, GII, GIII, GIV) presentaron los valores más bajos de fuerza de unión, los cuales fueron similares entre sí (p>0,05). Los mayores valores de fuerza de unión se observaron en raíces rellenas con AH Plus (GV, GVI, GVII, GVIII), principalmente sin limpieza de las áreas debilitadas, seguido de grabado ácido (GVII), y también con limpieza de las áreas debilitadas aunque sin grabado ácido (GVI) (p<0.05). Conclusión: Los mayores valores de fuerza de unión se observaron en las raíces rellenas con AH Plus; (1) sin limpieza de las áreas debilitadas y con grabado ácido, y; (2) con limpieza de las áreas debilitadas, pero sin grabado ácido.

Uso efectivo de los adhesivos de octava generación / Effective use of eighth generation adhesives

Introducción: se realizó una revisión bibliográfica con el objetivo de conocer, analizar y comparar los diferentes tipos de adhesivos de octava generación que se encuentran en el mercado y la diferencia que existe entre cada uno. Los adhesivos universales han demostrado mejoras en su resistencia, sobre todo en las técnicas de aplicación y en las propiedades de estos materiales, al mejorar la fuerza adhesiva para que el odontólogo pueda brindar tratamientos restaurativos exitosos. Objetivo: conocer, analizar y comparar los diferentes tipos de adhe- sivos de la octava generación empleados en odontología. Material y métodos: se realizó una búsqueda en las bases de datos electrónicas PubMed, BVS, Redalyc y ScienceDirect. Se utilizaron 32 artículos que cumplieron con los criterios predeterminados y la especificidad reque- rida para la pregunta de investigación. Conclusiones: se demostró que la tecnología cada día avanza, sobre todo en el área de los adhesivos, ya que éstos son de mucha utilidad en el día a día del odontólogo; es importante conocer cada uno de éstos, puesto que es un poco complejo seleccionar el correcto, mas no el uso. En la actualidad, existen diversas opciones por las que el odontólogo puede optar, es por ello que el pro- fesional debe estar capacitado sobre cada una de las diferentes marcas existentes y, de acuerdo al tratamiento, debe elegir cuál es mejor utilizar en una rehabilitación. Es importante para el odontólogo conocer estos materiales, ya que esto lo beneficiará al momento de llevar un plan de tratamiento restaurador (AU)

Introduction: a bibliographic review was carried out to learn about, analyze, and compare the different types of eighth-generation adhesives on the market and the difference between each one. Universal adhesives have demonstrated improvements in their resistance, especially in the application techniques and properties of these materials, improving the adhesive strength so that the dentist can provide successful restorative treatments. Objective: to know, analyze and compare the different types of eighth-generation adhesives used in dentistry. Material and methods: a search was made of the following electronic databases: PubMed, BVS, Redalyc, ScienceDirect. Finally, 32 articles that met the predetermined criteria and the specificity required for the research question were used. Conclusions: it was demonstrated that technology is advancing every day, especially in the area of adhesives since these are very useful in the daily life of the dentist. It is important to know each one of these since it is a little complex at the moment of selecting the correct one, but not the use. Currently, there are several options that the dentist can choose, which is why the professional must be trained on each of the various existing brands and according to the treatment which is the best to use at the time of rehabilitation. The dentist needs to know these materials since they will benefit him/her when carrying out a restorative treatment plan (AU)

Potencial remineralizante del fluoruro diamino de plata al 38% en dentina de dientes temporales afectada por caries / Remineralizing potential of 38% silver diamine fluoride in dentin affected by dental caries

Introducción: la caries es una enfermedad compleja que afecta a cualquier edad. La prevalencia es mayor en la primera dentición, sobre todo en población con baja percepción económica. El fluoruro diamino de plata (FDP) al 38% ha sido utilizado como una alter- nativa de tratamiento para esta enfermedad. Funciona como una solución remineralizante y cariostática. Objetivo: evaluar el efecto remineralizante del FDP al 38% en dentina afectada por lesiones de caries en molares temporales. Material y métodos: estudio clínico, epidemiológico, descriptivo, longitudinal y experimental. Se llevó a cabo en molares de primera dentición de niños de tres a cinco años de edad. Los niños seleccionados tenían molares con lesiones cariosas dentinarias, Pitts las denomina D3. No se incluyeron niños con dientes que presentaron patologías pulpares irreversibles. La aplicación del FDP al 38% la efectuó un operador entrenado para esta finalidad. Se utilizaron los criterios de Nyvad para determinar el grado de dureza de la dentina y con ello deducir su remineraliza- ción. Se observó la permanencia de la remineralización efectuada por un periodo de cinco meses. Resultado y conclusión: el FDP es un compuesto eficaz en 91% de los casos en un periodo de cinco meses o más (AU)

Introduction: dental caries is a complex disease that affects any age. The prevalence is higher in primary dentition, especially in a population with low economic perception. 38% silver diamine fluoride (FDP) has been used as an alternative treatment for this disease. It works as a remineralizing and cariostatic solution. Objective: to evaluate the remineralizing effect of 38% FDP on dentin affected by dental caries, in temporary molars. Material and methods: clinical, epidemiological, descriptive, longitudinal and experimental study. It was carried out in temporary molars of children between three and five years of age. The selected children presented molars with dental carious lesions, Pitts calls them D3. Children with teeth that presented irreversible pulp pathologies were not included. The application of the FDP to 38% was carried out by an operator trained for this purpose. The Nyvad criteria were used to determine the degree of hardness of the dentin and thereby deduce its remineralization. The permanence of the remineralization carried out was observed for a period of five months. Result and conclusion: the FDP is an effective compound in 91% of the cases, in a period of five months or more (AU)

Influence of violet LED associated or not with peroxide gel on inflammation, mineralization, and collagen fiber maturation in dentin and pulp tissue.

OBJECTIVES: To evaluate the influence of violet LED, associated or not with a 17.5% hydrogen peroxide (HP) bleaching gel, on inflammation, mineralization in pulp tissue, and collagen fiber maturation in dentin and pulp tissue. MATERIALS AND METHODS: The maxillary molars of eighty Wistar rats were distributed into four groups (n = 10): CONT - without treatment; HP - 30 min application of 17.5% HP; LED - 20 min application of violet LED; and HP+LED - application of PH and violet LED. Rats were euthanized and jaws were processed for histologic and immunohistochemical evaluation (IL-17, IL-23, and osteocalcin) and picrosirius red immediately after (T0), and at 7 (T1), 15 (T2), and 30 days (T3) post-treatment, with Wilcoxon, Mann-Whitney, paired T-test, and T-test (α = 0.05). RESULTS: HP and HP+LED presented necrosis and severe inflammatory infiltrate. When compared to CONT group, LED presented severe osteocalcin (OCN) immunostaining in T2 and less immature fibers in T2 and T3. CONCLUSION: The violet LED caused no severe damage to the pulp tissue, increased IL-17 and IL-23 expression in T0 when associated with HP, and had no influence on pulp tissue mineralization, besides accelerating the maturation of collagen fibers of dentin. CLINICAL RELEVANCE: Violet LED therapy induced no inflammation in the pulp tissue of rats and played no role in pulp tissue fibrosis, besides accelerating the maturation of dentin collagen fibers.

Comparación de la fuerza de adhesión a dentina de cementos de autograbado vs grabado total / Comparison of bond strength to dentin of self-etching cements vs total etching

Los sistemas cementantes han mejorado notablemente, los objetivos que persiguen los nuevos cementos es que la adhesión sea duradera y conseguir siempre que sea posible una interface cerrada con un sellado perfecto. Se han podido desarrollar nuevas técnicas y nuevos materiales de cementación que han ido perfeccionando la unión del material restaurador al diente. En el presente estudio se compara la fuerza de adhesión a dentina de cementos de autograbado y cementos de grabado total para comprobar los efectos positivos en el grabado de la dentina. Para el estudio se utilizaron dos cementos a base de resina (RelyX U200 Clicker 3M y RelyX Ultimate 3M). Se encapsularon 40 molares en acrílico en dos grupos de 20 muestras para la aplicación de dos sistemas cementantes de autograbado (grupo 1) y de grabado total (grupo 2), respectivamente, se desgastaron hasta descubrir la dentina; siguiendo las especificaciones del fabricante se colocó el cemento en cada grupo, y después se sometieron a pruebas de cizalla en una máquina de ensayo universal Instron. La medida expresada en megapascales (MPa) fue: grupo 1 = 7.5569 y grupo 2 = 12.6444. En este caso fueron analizados dos grupos, tomándose la primera significancia bilateral. Se realiza la prueba en t de Student, con 95% de intervalo de confianza en la diferencia, demostrando así que el cemento RelyX Ultimate 3M tiene mayor fuerza de adhesión que el cemento RelyX U200 Clicker 3M. Nuestra investigación fue factible y llegamos a nuestro propósito, en el cual comprobamos la mayor adhesión de cementos de grabado total, los cuales son sometidos a un previo tratamiento del diente (AU)

Adhesión a dentina parte I: características del sustrato y sistemas adhesivos / Dentin bonding part I: substrate characteristics and bonding systems

La Odontología Restauradora contemporánea no puede concebirse sin la adhesión de los materiales restauradores a las estructuras dentarias. En mu-chos procedimientos restauradores, no sólo el esmal-te sino también la dentina se encuentra involucrada, por lo tanto, la adhesión a esta última juega un rol cla-ve en el éxito clínico. No obstante, todavía supone un gran desafío lograr una adhesión estable y predeci-ble en el tiempo. El propósito del presente artículo es analizar las características principales de la dentina como sustrato adhesivo y describir los sistemas ad-hesivos actuales y sus mecanismos de acción (AU)

Contemporary Restorative Dentistry cannot be conceived without the adhesion of restorative materials to dental structures. In many restorative procedures not only the enamel, but also the dentin is involved, therefore dentin bonding plays a key role in their success. However, it is still a great challenge to achieve stable and predictable dentin bonding over time. The aim of this article is to analyze the main characteristics of dentin as an adhesive substrate and to describe current adhesive systems and their bonding mechanisms (AU)

Adhesión a dentina part II: estrategias para optimizar la adhesión a dentina y protocolos adhesivos / Dentin bonding part II: strategies to optimize dentin bonding and adhesive protocols

La adhesión a dentina con sistemas adhesivos polimé-ricos representa un desafío que surge de la necesi-dad de vincular un sustrato dentario heterogéneo y variable con materiales que presentan todavía cier-tos aspectos a atender para poder conseguir el máxi-mo desempeño. El propósito del presente artículo es evaluar algunas de las estrategias propuestas para mejorar la adhesión a dentina, y sugerir un protocolo de trabajo con los diferentes tipos de sistemas adhesivos (AU)

Dentin bonding with polymeric adhesive systems represents a challenge that arises from the need to link a heterogeneous and variable dental substrate with materials that still have certain aspects to be addressed in order to achieve maximum performance. The aim of this article is to evaluate some of the proposed strategies to improve dentin bonding and to suggest a protocol for each different type of bonding systems (AU)

Biomateriales que inducen la remineralización del esmalte dental y dentina / Biomaterials that induce remineralization of the dentin and enamel surface

Desde los sesentas, con la invención del vidrio bioactivo, los tratamientos de remineralización se han popularizado entre los cirujanos dentistas y su utilización es cada vez mayor; la remineralización, en conjunto con las adecuadas medidas de higiene preventiva, representa uno de los mejores abordajes mínimamente invasivos y a un costo comparativamente bajo. Este estudio documental tiene por objetivo establecer una mejor comprensión del uso clínico de los biomateriales que inducen la remineralización de la superficie del esmalte dental y dentina. Se realizó una exploración utilizando motores de búsqueda (bases de datos en PubMed, Medigraphic, y Science Direct). El proceso de localización de los estudios relevantes se efectuó introduciendo palabras clave como: silicatos de calcio, fosfopéptidos de caseína-fosfato de calcio amorfo, remineralización, esmalte y dentina, incluyéndose en el procedimiento artículos de antigüedad no superior a siete años, en español e inglés, publicados en revistas científicas aprobadas por pares.Actualmente, no es posible remineralizar del todo la estructura dentaria, por lo cual, en un futuro cercano, los esfuerzos de la odontología de remineralización deben apuntar al desarrollo de agentes biomiméticos inteligentes que restauren al cien por ciento la estructura dental perdida (AU)

Since the sixties, with the invention of bioactive glass, remineralization treatments have become popular among dental surgeons. Their usage is increasing; remineralization, in conjunction with appropriate preventive hygiene measures, represents one of the best minimally invasive treatments at a relatively low cost. This documentary study aims to establish a better understanding of the clinical use of biomaterials that induce remineralization of the surface of teeth enamel and dentin. A search was conducted using search engines (PubMed and Medigraphic databases, and Science Direct). The search process for the relevant studies was carried out by introducing keywords such as calcium silicates, phosphopeptides of amorphous calcium casein-phosphate, remineralization, enamel and dentin, including in the search articles no older than seven years in Spanish and English published in scientific reviewed journals. Currently, it is not possible to completely remineralize the dentary structure so, in the near future, remineralization dentistry efforts should aim to develop (AU)

Contaminación de la dentina con diferentes técnicas de secado / Contamination of dentin with different drying techniques

El secado es uno de los factores clave para lograr una adhesión micromecánica exitosa en la dentina con los sistemas adhesivos de grabado independiente. El objetivo de este trabajo fue comparar los residuos remanentes luego de cuatro procedimientos diferentes de secado en preparaciones ex vivo en dentina. Se utilizaron cinco terceros molares ex-vivo, en cada uno de los cuales se realizó una preparación dentinaria en piso y paredes con al menos un socavado. Las unidades experimentales fueron almacenadas en solución fisiológica durante 7 días. Las distintas técnicas de secado (G1- G8) se aplicaron, luego de que las preparaciones fueron tratadas con gel de ácido fosfórico al 37% (Blue Gel etch Megadental) durante 15s y lavadas con jeringa y agua a presión durante 15s (Técnica de Grabado Ácido o TGA), de la siguiente manera: algodón común (Condesa) (G1), papel tisú (Achiss) cortado a mano (G2) y con tijera (G3), esponja (Sharpys) (G4), papel tisú (Simplicity) cortado a mano (G5)(AU)

A quaternary ammonium silane antimicrobial triggers bacterial membrane and biofilm destruction.

To study the antimicrobial effects of quaternary ammonium silane (QAS) exposure on Streptococcus mutans and Lactobacillus acidophilus bacterial biofilms at different concentrations. Streptococcus mutans and Lactobacillus acidophilus biofilms were cultured on dentine disks, and incubated for bacterial adhesion for 3-days. Disks were treated with disinfectant (experimental QAS or control) and returned to culture for four days. Small-molecule drug discovery-suite was used to analyze QAS/Sortase-A active site. Cleavage of a synthetic fluorescent peptide substrate, was used to analyze inhibition of Sortase-A. Raman spectroscopy was performed and biofilms stained for confocal laser scanning microscopy (CLSM). Dentine disks that contained treated dual-species biofilms were examined using scanning electron microscopy (SEM). Analysis of DAPI within biofilms was performed using CLSM. Fatty acids in bacterial membranes were assessed with succinic-dehydrogenase assay along with time-kill assay. Sortase-A protein underwent conformational change due to QAS molecule during simulation, showing fluctuating alpha and beta strands. Spectroscopy revealed low carbohydrate intensities in 1% and 2% QAS. SEM images demonstrated absence of bacterial colonies after treatment. DAPI staining decreased with 1% QAS (p < 0.05). Fatty acid compositions of dual specie biofilm increased in both 1% and 2% QAS specimens (p < 0.05). Quaternary ammonium silane demonstrated to be a potent antibacterial cavity disinfectant and a plaque inhibitor and can be of potential significance in eliminating caries-forming bacteria.

Is it necessary to pre-treat Dentine before GIC Restorations? Evidence from an in Vitro Study / É necessário pré tratar a dentina antes das restaurações de CIV? Evidência de um estudo in vitro

ABSTRACT The aim of this study was to assess the influence of differentpretreatmentapproaches on glass ionomer cement (GIC)bond strength (BS) to dentine. Sixty bovine incisors wereallocated into six groups according to substrate - sound orcariesaffecteddentine; and substrate pretreatmentapproach -no conditioning (control), polyacrylic acid for 10 s andphosphoric acid for 7 s. Teeth in the cariesaffecteddentinegroup were previously submitted to cariogenic pHcyclingchallenge. After dentine pretreatment,according to experi mentalgroups, polyethylene tubes were placed on flat dentinesurfaces and filled with GIC. Teeth were stored in distilledwater for 24 h at 37 °C and then submitted to microshear test(0.5 mm/min). Failure pattern analysis was performed understereomicroscope (400x). Data were analysed using twowayANOVA and Tukey's test (α=5%). Statistically significantdifferences were found for the pretreatmentapproach,regardless of substrate (p<0.001). The polyacrylic acid groupand control group had similar BS values, and were both betterthan the phosphoric acid group. In general, GIC had betterbonding performance in sound dentine than in cariesaffecteddentine. In conclusion, dentine pretreatmentwith polyacrylicacid did not improve the performance of GIC restoration onclinically relevant substrates.

RESUMO O objetivo deste estudo foi avaliar a influência de diferentesprétratamentosna resistência de união (RU) de cimentos deionômero de vidro (CIV) a dentina. Sessenta incisivos bovinosforam alocados em 6 grupos de acordo com o substrato -hígido ou cariado; e com a abordagem de prétratamento-sem condicionamento (controle), ácido poliacrílico por 10 s, eácido fosfórico por 7 s. Os dentes pertencentes aos grupos dedentina cariada foram previamente submetidos ao desafiocariogênico por meio da ciclagem de pH. Após o prétratamentoda dentina, de acordo com os grupos experimentais,tubos de polietileno foram colocados sobre superfícies planas dedentina e preenchidos com CIV. Os dentes foram armazenadosem água destilada por 24 h a 37°C e então submetidos ao testede microcisalhamento (0,5 mm/min). A análise do padrão defratura foi realizada em estereomicroscópio (400x). Os dadosobtidos foram analisados usando ANOVA de dois fatores e testede Tukey (α=5%). Diferença estatisticamente significante foiencontrada para as diferentes abordagens de prétratamento,independente do substrato (pp<0,001). Aplicação de ácidopoliacrílico resultou em valores de RU similares aos do grupocontrole. Entretanto, ambos os grupos mostraram um melhordesempenho quando comparado a aplicação de ácidofosfórico. De forma geral, CIV apresentou melho5 desempenhoadesivo em dentina sadia quando comparada a dentinacariada. Em conclusão, o prétratamentoem dentina comácido poliacrílico não melhora o desempenho das restauraçõesde CIV em substratos clinicamente relevantes.

Caries Prevention Effects of Silver Diamine Fluoride with 10,600 nm Carbon Dioxide Laser Irradiation on Dentin.

Objective: To investigate the caries prevention effect of silver diamine fluoride (SDF) with a carbon dioxide (CO2) laser (λ = 10,600 nm) on dentin. Method: Human dentin slices (n = 10) were prepared and allocated to the following treatments: Group 1 (SDF)-slices received an SDF application. Group 2 (laser)-slices were irradiated with a CO2 laser. Group 3 (laser + SDF)-slices were irradiated with a CO2 laser, followed by an SDF application. Group 4 (negative control)-slices had no treatment. All of the slices were subjected to pH cycling for cariogenic challenge. Lesion depth, nanohardness, and chemical and morphological changes were assessed by microcomputed tomography (micro-CT), nanoindentation, and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), respectively. Results: micro-CT determined lesion depths for groups 1-4 were 27 ± 6, 138 ± 32, 17 ± 5, and 182 ± 49 µm, respectively (p < 0.001; group 3 < group 1 < groups 2 and 4). The nanohardness values for groups 1-4 were 456 ± 109, 288 ± 5, 444 ± 142, and 258 ± 76 MPa, respectively (p = 0.003; groups 2 and 4 < groups 1 and 3). EDS determined that the calcium-to-phosphorus molar ratio for groups 1-4 were 1.26 ± 0.12, 1.07 ± 0.19, 1.37 ± 0.08, and 0.80 ± 0.17, respectively (p < 0.001; group 4 < group 2 < groups 1 and 3). SEM evidenced no ablation or cracking on the lased dentin surfaces. The treated dentin showed a relatively more intact and smoother surface morphology compared with the untreated dentin. Conclusions: SDF can reduce dentin demineralization against cariogenic challenge, and the caries preventive effect of SDF is further enhanced through CO2 laser irradiation.

Remineralization of dentin slices using casein phosphopeptide-amorphous calcium phosphate combined with sodium tripolyphosphate.

BACKGROUND: The remineralization approach mechanically occludes the exposed dentinal tubules mechanically, reduces the permeability of dentinal tubules and eliminates the symptoms of dentin hypersensitivity. The aim of the present study was to investigate the remineralization of demineralized dentin slices using CPP-ACP combined with TPP, and the research hypothesis was that CPP-ACP combined with TPP could result in extrafibrillar and intrafibrillar remineralization of dentin. METHODS: Demineralized dentin slices were prepared and randomly divided into the following groups: A (the CPP-ACP group), B (the CPP-ACP + TPP combination group), C (the artificial saliva group), D (the negative control group), and E (the positive control group). Dentin slice samples from groups A, B and C were remineralized and the remineralization effect was evaluated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD). RESULTS: Treatment with CPP-ACP combined with TPP occluded the dentinal tubules and resulted in remineralization of collagen fibrils. The hydroxyapatite crystals formed via remineralization were found to closely resemble the natural dentin components. CONCLUSION: CPP-ACP combined with TPP has a good remineralization effect on demineralized dentin slices.

Antimicrobial activity of intracanal dressings composed by natural products associated to chlorhexidine and its influence on dentinal colour change / Avaliação da ação antimicrobiana de medicações intracanais à base de produtos fitoterápicos associados à clorexidina e sua influência na alteração de cor da estrutura dentinária

Purpose: evaluate the antimicrobial activity of intracanal dressings and their influence on dentinal colour changes. Material and methods: eighty single-rooted human extracted teeth were decoronated and divided into eight groups (n=10) according to intracanal dressing protocols inserted into the root canals: G1­distilled water (DW); G2­2% chlorhexidine gel (CHX); G3­calcium hydroxide (Ca[OH]2)+DW; G4­grape seed extract (GSE)+DW; G5­ginger extract (GE)+DW; G6­Ca(OH)2+CHX; G7­GSE+CHX; and G8­GE+CHX. The antimicrobial activity was evaluated by colony-forming units (CFUs) counting and dentinal colour changes was evaluated by digital spectrophotometry. Data were statistically analysed by One-way ANOVA followed by Tukey´s post hoc test (antimicrobial evaluation) and non-parametric Wilcoxon followed by the Mann- Whitney-U test (colour change evaluation) (α=0.05). Results: the highest bacterial reduction was observed in groups 4, 6, 7 and 8, with no significant difference between them (p<0.05). Groups 4 and 7 showed the highest medians of dentinal colour change (p<0.05). Conclusion: the addition of CHX improved the antimicrobial activity of GE-based intracanal dressing, with no effect in GSE-based intracanal dressing; moreover, these protocols induced significant dentinal colour changes. (AU)

Objetivo: avaliar a atividade antimicrobiana de medicações intracanais e sua influência na alteração da cor dentinária. Materiais e métodos: oitenta dentes humanos extraídos unirradiculares foram seccionados e divididos em oito grupos (n = 10), de acordo com os protocolos de medicação intracanal inseridos nos canais radiculares: água destilada G1 (DW); G2-2% de gel de clorexidina (CHX); hidróxido de cálcio G3 ­ (Ca [OH] 2) + DW; extrato de semente de uva G4 (GSE) + DW; extrato de gengibre G5 (GE) + DW; G6- Ca (OH) 2 + CHX; G7 ­ GSE + CHX; e G8-GE + CHX. A atividade antimicrobiana foi avaliada por contagem de unidades formadoras de colônias (UFCs) e as alterações de cor dentinária foram avaliadas por espectrofotometria digital. Os dados foram analisados estatisticamente por ANOVA one-way, seguida pelo teste post hoc de Tukey (avaliação antimicrobiana) e Wilcoxon não paramétrico, seguido pelo teste de Mann- Whitney-U (avaliação da mudança de cor) (α = 0,05). Resultados: a maior redução bacteriana foi observada nos grupos 4, 6, 7 e 8, sem diferença significativa entre eles (p < 0,05). Os grupos 4 e 7 apresentaram as maiores medianas da alteração da cor dentinária (p < 0,05). Conclusão: a adição de CHX melhorou a atividade antimicrobiana da medicação intracanal baseado em GE, sem efeito na medicação intracanal baseado em GSE; além disso, esses protocolos induziram alterações significativas na cor dentinária.(AU)

Adhesive resistance of a copaiba oil-based dentin biomodifier.

This study analyzed the effect of prior application of copaiba oil (CO) emulsions as a dentin cleaning substance on microleakage and microtensile adhesive strength. Twenty-five premolars and sixty-four molars were used for microleakage and microtensile assays. For the microleakage assays, specimens with standard class V cavities were divided (n = 5), according to the tested CO emulsions: CO10%X, CO10%Y, and CO10%Z, as well as chlorhexidine 2% (CHX) and distilled water (DW), as positive and negative controls, respectively. Restorations were performed using the Adper Single Bond® and/or Clearfil SE Bond® systems. Cervical, occlusal, distal and mesial sections were assessed for tracer penetration degree at the composite/tooth interface. For the microtensile assay, healthy molars were divided into sixteen groups, in which artificial caries were induced in half of the groups. Dentin surfaces were treated with CO10%X and CO10%Y, CHX and DW. Microtensile bond strength was measured by fixing each sample to the plate of a universal testing machine operated at a speed of 0.5 mm/minute until failure. Dentin treated with CO10%X showed a lower infiltration rate than dentin treated with the other CO emulsions, CHX2% and DW. According to the microtensile assay, both healthy and affected dentin treated with CO10%X and Adper Single Bond® adhesive system presented higher adhesive strength. CO emulsion, used as a dentin biomodifier, interfered positively in microleakage and improved adhesive strength after acid etching in the Adper Single Bond® adhesive system, or before applying the Clearfil SE Bond® self-etching system.

Caries removal with Er:YAG laser followed by dentin biomodification with carbodiimide and chitosan: Wettability and surface morphology analysis.

This study aimed to investigate dentin wettability and surface morphology after selective removal of carious lesion by erbium-doped yttrium aluminum garnet (Er:YAG) laser, followed by dentin biomodification with carbodiimide (EDC) and chitosan (CHI). Seventy-eight bovine dentin specimens were submitted to caries induction. Specimens were distributed according to methods of carious removal (n = 39): bur at low-speed (40,000 rpm) or Er:YAG laser (noncontact mode, 250 mJ/pulse and 4Hz). All specimens were etched with 35% phosphoric acid, and subdivided according to dentin biomodification (n = 13): Control (no biomodification), EDC or CHI. The contact angle (n = 10) between adhesive system (3M ESPE) and dentin surface was measured by a goniometer. Eighteen specimens (n = 3) were analyzed by scanning electron microscopy. Data were analyzed by two-way ANOVA and Tukey's test (α = .05). The method used to remove carious lesion did not influence the wettability of dentinal surface (p = .748). The angles produced on the remaining dentin after biomodification were influenced (p = .007). CHI promoted higher contact angles (p = .007) and EDC did not differ from the control group (p = .586). In the bur-treated group, most tubules were open, regardless of which biomodifier was used. Laser modified the organic matrix layer. CHI promoted partially closed tubules in some areas while EDC exposed dentinal tubules. Regardless of which method was used for selective removal of carious lesion, biomodification with EDC did not affect the dentin wettability, whereas CHI changed the wettability of remaining dentin. Both biomodifiers promoted a slight change on dentin morphology.

Effect of Different Dentin Conditioning Agents on Growth Factor Release, Mesenchymal Stem Cell Attachment and Morphology.

INTRODUCTION: EDTA has been considered the gold standard in regenerative endodontic treatments. The aim of this study was to evaluate the effects of different dentin conditioning agents other than EDTA on released growth factors, mesenchymal stem cell attachment, and morphology. METHODS: Transforming growth factor beta 1, vascular endothelial growth factor, bone morphogenetic protein 2, and fibroblast growth factor 2 release from prepared dentin discs conditioned with 17% EDTA, 10% citric acid, 1% phytic acid (IP6), or 37% phosphoric acid were quantified using the enzyme-linked immunosorbent assay after final irrigation and after 3 days of adipose-derived mesenchymal stem cell (adMSC) seeding. Forty root fragments were prepared from extracted single-rooted teeth. The morphology and attachment of adMSCs on the conditioned root fragments were observed using a scanning electron microscope. Data for growth factor quantification were analyzed using 1-way analysis. RESULTS: The highest transforming growth factor beta 1 release was observed after citric acid treatment followed by phosphoric acid; there was no significant difference between them, but compared with EDTA and 1% IP6, there were significant differences observed. The enzyme-linked immunosorbent assay detected a very minor exposure of vascular endothelial growth factor and fibroblast growth factor 2 after dentin conditioning, but there were no significant differences between the groups. The greatest bone morphogenetic protein 2 release was observed in the 1% IP6 group, but there were no significant differences between the groups. Three days of adMSC seeding after dentin conditioning has made a dramatic increase in all of the growth factors, and phosphoric acid appeared to be the most effective agent with significant differences compared with the remaining groups. Scanning electron microscopic observations showed that none of the conditioning solutions had an adverse effect on stem cell proliferation and attachment to root dentin. Different cell morphologies like round, oblong, flat, and well-attached cells with developed filopodia were observed in the dentin-conditioned groups. CONCLUSIONS: Phosphoric acid conditioning could be useful and may have beneficial effects in regenerative endodontic treatments.